Boyesen Home

Boyesen Engineering

Skip to Main Content »

BE SOCIAL: 
Search Site
 
FOLLOW OUR PATH
TO THE PODIUM:
NEW PRODUCTS
Posted Date: 2017-11-02
Boyesen RC2 Series Rad Valve for 2017-2018 KTM and Husqvarna 250/300 Models
Model Specific Designs Optimize the KTM and Husqvarna Intake. The Best Power, All the Time!
PRODUCT INTRODUCTION:
Boyesen Engineering would like to introduce the all-new KTM and Husqvarna RC2 Series Rad Valve, designed to increase overall horsepower and throttle response in the new generation 2017 thru 2018 carbureted engine platform.

RAD VALVE PERFORMANCE:
The new RC2 Series Rad Valve is Performance Optimized - tailor made to give the new 2017-2018 KTM and Husky 250cc/300cc engines improved roll-on transition from low to mid, and greatly enhanced mid-range torque. The performance goal for the new KTM and Husky engine platform further enhances the smooth and powerful engine performance delivery characteristics that are inherent in the new KTM and Husky engines. The RC2 Series Rad Valve multi-stage reed petal system has also been painstakingly developed and tested to increase throttle response and acceleration, while also broadening peak RPM horsepower output.

The Rad Valves seamless, one-piece, precision casting and continuous aero-form surfacing provide maximum flow velocities and instant, explosive movement of air particles the moment you turn the throttle. Standard equipment on each Rad Valve, are Boyesens dual-stage model-tensioned carbon reed petals. The race-proven reed petals are integral to the Rad Valves ability to maintain timing with the power pulses of the KTM and Husky engine platforms. Your machine will gain maximum flow velocity across the entire RPM range, and at all throttle settings. Smooth. Sharp. Smart.

AERO OPTIMIZED INTERNAL SURFACING
The ONLY performance system with aerodynamic internal surfacing.
The Rad Valves internal precision surfacing treatment eliminates all hard edges that interrupt the proper delivery of air and fuel. Because internal air turbulence is virtually non-existent, the proper air/fuel control is optimized for the characteristics of the KTM and Husky engine platform.

XCROSS DUAL CARBON WEAVE
Model-specific reed tension for maximal response.
The Rad Valves Multi-Staged reed petal stacks feature Aerospace carbon material interwoven into tension combinations that maximize power delivery and peak horsepower. Boyesen engineers specifically tune the carbon matrix tension using a model-specific, carbon weave formula that is tested and optimized for each KTM and Husky model.

MS PLUS FLOW OPTIMIZATION
One reed petal is NOT enough!
The reed petals in modern 2 stroke engines take an incredible amount of abuse! At peak RPM reed petals are opening and closing hundreds of times per second. Over time, a single reed loses its ability to regulate flow rates in proper proportions. This causes a loss of reed petal reaction and reduces the consistency of peak horsepower. MS PLUS Optimization uses multi staged reed petals to distribute the engines pulse forces over more surface area. By using a multiple reed petal stack, it is possible to achieve peak horsepower AND durability. The patented multi-stage design incorporates a specially shaped top reed petal and a ported bottom reed petal. The top petals are lightweight and resilient for crisp throttle response at partial throttle or low RPMs. The stiffer, bottom petal is ported to provide maximum flow and horsepower at higher RPMs. The result: Full Spectrum horsepower and lightning –fast response.

T2 EPOXY
The most durable materials. The most lifespan.
The RC2 Series Rad Valve now features category leading toughening additives to increase reed petal lifespan by resisting breakdown from damaging agents found in fuel. This is done to ensure a long lasting seal between the petals and the intake tract time and time again, which results in more consistent horsepower for longer periods of time between general intake reed maintenance.

RETAIL PRICE:
The manufacturers suggested retail price of Boyesens KTM and Husqvarna RC2 Series Rad Valve Intake System is $179.95 (USD).

APPLICATIONS:
Part Number: RAD-42E

KTM Models
KTM 250 SX 2017 and 2018
KTM 250 EXC 2017 and 2018
KTM 250 XC 2017 and 2018
KTM 250 XC-W 2017 and 2018
KTM 300 EXC 2017 and 2018
KTM 300 XC 2017 and 2018
KTM 300 XC-W 2017 and 2018

Husqvarna Models
Husqvarna TC250 2017 and 2018
Husqvarna TE250 2017 and 2018
Husqvarna TE300 2017 and 2018
Husqvarna TX300 2017 and 2018

AVAILABILITY:
The Boyesen RC2 Series Rad Valve system is available at your local dealer or popular web retailers. If your regional dealership has chosen not to stock this product, Boyesen also makes it available for purchase at our webstore. Visit www.boyesen.com for more information, or to make your purchase.
Keywords: KTM Motorcycles, Husqvarna Motorcycles, KTM 300 XC reeds, KTM 300 intake, KTM 250 SX, KTM 250 XC, KTM 250 XC-W, KTM 300 XC, KTM 300 XC-W, Husqvarna TC 250, Husqvarna TX 300, Triple Stage Reeds, Intake Performance, Boyesen, Boyesen Rad Valve, Motocross Performance Air Intake System, Dirt Bike Parts, RC2 Rad Valve, Yamaha Performance Parts, Two Stroke Intake Systems, Air Intake, Dirt Bike Parts, RC2 Series Rad Valve, Boyesen Engineering, Laminar Flow, Motocross Performance, Offroad Performance, Air Velocity, Performance Intake, Throttle Response, Boyesen Rad Valve, Motorcycle Parts
 
 
COMPANY
About Boyesen
For more than 30 years Boyesen has specialized in the design and manufacture of high-performance parts to the power sports industry. The confidence instilled by Factory Race Team Research and Development partnerships bleeds all the way down to weekend warriors looking for the highest performing and longest lasting products on the market. Boyesen's tagline, "Leading Edge Performance", is recognized worldwide. From their innovative industry leading performance reeds, to their complete intake track System, Boyesen continues to consistently set the standard for performance and manufacturing build quality.
SHOP BY SEGMENT:
PRODUCT LISTINGS
 
2011-2014 Boyesen Inc. All Right Reserved.